For most Kentucky homes with a natural gas line, a gas furnace costs less to run and puts out hotter air on a cold January night. An electric furnace costs less to buy and install, needs no gas line or venting, and makes sense for smaller homes, homes without gas service, or houses where a heat pump does most of the heating. The gas vs. electric furnace decision usually comes down to three things: whether gas is available at your address, how cold your winters run, and how long you plan to stay in the house.
Kentucky winters bring cold snaps that drop into the teens, but plenty of December days hover in the 40s. The right furnace for a drafty farmhouse in Hardin County might be the wrong one for a newer, tight build in Oldham County.
How Each Furnace Makes Heat
Both furnaces push warm air through the same ductwork, but they create that heat in very different ways.
Gas Furnaces
A gas furnace burns natural gas or propane in a burner, and a heat exchanger transfers that heat to the air your blower sends through the house. Because combustion happens inside the unit, a gas furnace needs a flue or vent pipe, a working gas line, and regular safety checks on the burners and heat exchanger.
Electric Furnaces
An electric furnace runs current through resistance coils, much like a toaster, and the blower moves air across them. There’s no flame, exhaust, or flue, so nearly all the energy going in comes out as heat.
Operating Cost: Where the Real Difference Shows Up
Knowing how each furnace works explains why their monthly bills differ. Electric furnaces turn nearly every watt into heat, yet electricity usually costs more per unit of heat than natural gas, so gas typically wins on monthly cost through a Kentucky winter. Your actual numbers depend on utility rates, your home’s size and insulation, and the gas furnace’s efficiency rating.
If your electric bill seems high even though you heat with gas, look at the blower. The blower motor, igniter, and controls all run on electricity, and an older blower running long cycles in a leaky house adds up, especially with a dirty filter.
Upfront Cost and Installation
Monthly bills are only half of the math. Electric furnaces are simpler machines with fewer parts, so the equipment and labor usually cost less, and installation is easier because there’s no venting to run.
A gas furnace costs more to install, and the price climbs if your home needs a new gas line, flue, or venting for a high-efficiency model. For any furnace, price depends on square footage, the unit’s size and efficiency, ductwork condition, and any electrical or gas work.
For comfort, a properly sized heating installation matters more than fuel type. An oversized or undersized furnace short cycles or runs nonstop either way.
Downsides of Each Option

Every furnace type has trade-offs worth weighing.
- Gas furnace downsides: Higher installation cost, the need for annual combustion and carbon monoxide safety checks, and no option at all if your street doesn’t have gas service.
- Electric furnace downsides: Higher monthly heating bills, slower warm-up on very cold mornings, and heavy electrical demand that some older panels can’t handle without an upgrade.
Neither list is a deal breaker on its own. The right choice depends on which downsides matter least for your house.
Where a Heat Pump Fits In
Many homeowners comparing gas and electric furnaces end up looking at a third option. A heat pump moves heat instead of making it, so it heats far more efficiently than an electric furnace in mild weather and handles summer cooling too.
In homes without gas, an electric furnace as backup heat covers the coldest nights. In homes with gas, a dual-fuel setup lets the heat pump run on mild days and the gas furnace take over in deep cold.
If you already have a heat pump that’s struggling, heat pump replacement can change which furnace makes sense as the backup.
Making the Call for Your Home
With all of that in mind, the deciding questions are simple: is natural gas service available at your address, how old is your current furnace, and how long will you stay in the house? Whichever fuel you choose, annual service keeps it safe and efficient, and our guide to fall furnace maintenance covers what that visit includes.
Frequently Asked Questions About Furnace Replacement
Is it cheaper to run a gas or electric furnace?
In most Kentucky homes with natural gas service, a gas furnace is cheaper to run because gas usually costs less per unit of heat than electricity. An electric furnace can still make sense in a small, well-insulated home or as backup heat for a heat pump, where it doesn’t run as often.
Can I replace my gas furnace with an electric furnace?
Yes, you can switch, but it usually takes more than swapping the unit. Electric furnaces draw a lot of power, so many homes need an electrical panel upgrade or a new dedicated circuit, and the old gas line and flue have to be capped and sealed safely.
How can I tell if my furnace is gas or electric?
Look for a gas line with a shutoff valve running into the furnace and a metal or PVC vent pipe leaving it, since those mean it burns gas. An electric furnace has no flue or gas connection and is usually fed by a large, dedicated breaker in your electrical panel.
Get an Honest Furnace Recommendation
When you’re ready for an honest side-by-side recommendation for your house, Air Support Heating and Cooling offers free consultations and upfront pricing on every furnace replacement and installation. Our technicians will look at your gas availability, ductwork, and electrical panel, then explain your options in plain language. Schedule your free consultation before the coldest stretch of the season arrives.